162 Océ VarioPrint ® 2100/2110 User's ManualHow to prepare your originals1. Jog the subset of originals carefully to make a straight stack.2. Put the stack face down and in the readable form into the automatic documentfeeder.3. If necessary, adjust the original guides.4. Press the key for a template, for example 'Standard job'.5. Press the key for 'Original'.6. Define the settings for the original.7. Press the key for 'Print '.8. Define the settings for the document to print.How to scan the subset1. Press the set-build key ( ).ResultThe originals in the automatic document feeder are scanned. The originals areadded to the other subsets. You can see the number of scanned subsets on thescreen in the feedback area. The screen also displays extra feedback for tabsand inserts.Note: When you are building a set, the next subset starts with the settings of theprevious subset. To process the new subset in a different method, you mustdefine new settings.How to finish your combined document1. Wait for the scan job to finish.2. Define the settings for the next subset.3. Scan the next subset.4. Repeat the steps 1, 2 and 3 above to scan more subsets.5. Select 'Output' to define the settings for Destination, Sort order, Staples and theStacking method.6. Set the number of copies with the numeric keys on the keyboard.7. Press the start key ( ) to print the whole document (add the job to the jobqueue) or to send the job to the local mailbox.Note: When you press the start key, the selected output settings and number ofcopies apply to the whole job.
