196 Océ VarioPrint ® 2100/2110 User's ManualChange the zoom factorIntroductionOriginals in the automatic document feederThe automatic zoom function is active when you put standard size originalsinto the automatic document feeder. If the size of the image on the original isdifferent from the size of the target scan value, the information is automaticallyresized (reduced or enlarged). By default, the zoom function is set to'Automatic'. To change the zoom factor manually, use the 'Zoom' function inthe 'Scan', 'Image' menu to change the zoom factor with the star arrow keys( ).Originals on the glass plateIf you use non-standard size originals, you must use the glass plate. Thescanner can not automatically detect the size of the originals on the glass plate.Therefore, you must select the page size and the 'Zoom' factor manually.The zoom function for the originals in the automatic document feeder isdifferent from the zoom function for the originals on the glass plate.[54] Zoom behavior[54] Zoom behaviorPurposeYou use the 'Zoom' factor to fit the information of the original on the targetscan without loss of information.Before you beginCheck the result of a zoom action (enlarged or reduced image) on the operatorpanel. When the result is satisfactory, you can start the scan-to-file job.Original Starting point of the zoom functionAutomatic documentfeedercenterGlass plate Upper left-hand corner
