Oce WP36/50 Operation Manual

Contents

Chapter 3 Using the Operator Panel3-11This section explains the procedure for using the menu selec-tion system. The menu selection system is activated by theMENU key while the printer is Ready.2.2.1 Printing the Menu MapThe printer prints a full list of menu selections. Note thatmenus indicated on the list may vary depending on which op-tion units are installed on the printer.Press the MENU key.Press the U or V key repeatedly until Print MenuMap appears.Press the ENTER key. A question mark (?) appears.Press the ENTER key again. The printer prints amenu map.Figure 3-22.2.2 Printing Status PageIf you want to check the printer’s current status, includingmemory available and option settings, you can find the infor-mation you need on the status page.Press the MENU key.Press the U or V key repeatedly until PrintStatus Page appears.Press the ENTER key. A question mark (?) appears.Press the ENTER key again. The printer prints astatus page.For a full description of the status, see the following samplestatus page.The following is a sample status page. The numbers below re-fer to the contents explained on the next page.Figure 3-3When the Network Status is turned on, the Network Interface Sta-tus Page will be printed after the Printer Status. (Seepage 3-20.)2.2 Using the Menu Selection SystemPrintMenu MapPrintMenu Map ?1234MENU MAPPrintStatus PagePrintStatus Page ?NOTE1234KIR Test pattern ONMemoryInstalled OptionsNetwork Status EmulationToner Gauge0 100InterfacesHardware InformationPage InformationError LogSTATUS PAGEFirmware Version: Released: 13578240A96