Oce WP36/50 Operation Manual

Contents

Chapter 3 Using the Operator Panel3-25Press the Z key to select an internal font, press theU or V key repeatedly until Internal appears.To select an option font, press the ENTER key while> Font Select > is displayed. Press the U or Vkey repeatedly until the message display indicatesOption.This operation is possible only when optionfonts are installed in the printer.Press the Z key.The letter before the number indicates the type offont as follows:Press the ENTER key. A blinking question mark (?)appears.Press the U or V key repeatedly until the desiredfont number appears. For font numbers of the inter-nal fonts, seeList of Fonts on page 6-1.When the desired font is displayed, press the ENTERkey.Press the MENU key. The message display returns toReady.Changing Type for Courier/Letter GothicCourier or Letter Gothic font type can be selected as Regular orDark. For example, to change the type of Courier, proceed as follows:Press the MENU key.Press the U or V key repeatedly until Font > ap-pears.Press the Z key.Check that Internal is displayed and press the Zkey.Press the U or V key repeatedly until >Courier ap-pears.Press the ENTER key. A blinking question mark (?)appears.Select Regular or Dark using the U or V key.Press the ENTER key.Press the MENU key and the message display re-turns to Ready.Changing the Font SizeYou can change the size of the default font. If the default fontis a fixed-pitch font such as Courier or Letter Gothic, thecharacter pitch can be changed instead of the font size.Press the MENU key.Press the U or V key repeatedly until Font > ap-pears.>Font Select >Internal>> I000Letter DescriptionI Internal fontsS Soft (down load) fontsM Fonts in an option memory cardH Fonts in a RAM disk or hard diskO Fonts in an option ROMTable 3-8>>?I000>Font Select >Internal345678Font >>Font Select >Internal>>CourierRegular>>Courier? RegularFont >12345678912