Setting Up Network Printing 375/60BW-1 3-30Setting the Macintosh computerUse the Macintosh computer that is connected to specify the TCP/IP andAppleTalk settings.2 ReminderFor network settings, consult the network administrator.For printer driver installation, refer to “Installing the Printer Driver” onpage 2-1.Since Bonjour (a Mac OS X 10.4 function) is always enabled, it is not re-quired to change the settings. Bonjour/Rendezvous is a Mac OS X func-tion. For Mac OS 9.2, connect using AppleTalk.For Mac OS X1 On the Apple menu, select [System Preferences].2 Click the “Network” icon.3 From “Show”, select [Built-in Ethernet].4 Click the TCP/IP tab.5 Select the items from “Configure” that correspond to the network set-tings for the Macintosh computer that is connected to the network, andthen set the IP address and subnet mask.6 If using an AppleTalk connection, click the AppleTalk tab, and thencheck that the [Make AppleTalk Active] check box is selected.7 Click the close button at the top left of the dialog box.The “Apply configuration changes?” message appears.8 Click the [Apply].The changed settings are saved.
