Setting Up Network Printing 375/60BW-1 3-173.7 Printing With NetWareThe print controller supports the following environments.Network Printing in a NetWare Environment2 NoteBefore using bindery emulation, check that bindery emulation is compat-ible with the NetWare server.For Remote Printer Mode With NetWare 4.x Bindery Emulation1 From a client computer, log on with Supervisor permissions to accessthe NetWare server where the Pserver is registered.2 Start up Pconsole.3 From the [Available Options] list, select [Quick Setup], and then clickthe [Enter].4 Enter the appropriate names in the “Printer Server Name”, “PrinterName”, “Print Queue Name”, and “Print Queue Volume” fields, select[Other/Unknown] from the [Printer type] field, and then save the speci-fied settings.5 Click the [Esc] to quit Pconsole.6 Use the NetWare server console to load PSERVER.NLM.– For queue user privileges, printer notification option, assignment ofmultiple queues, and passwords, refer to the NetWare documenta-tion, and specify settings as necessary.NetWare Version Protocol Used Emulation Service ModeNetWare 4.x IPX NDS/Bindery Pserver/NprinterNetWare 5.x/6 IPX NDS PserverTCP/IP NDPS(lpr)
