Setting Up Network Printing 375/60BW-1 3-20IPX Setting: Select [ON].Ethernet Frame Type: Select [Auto Detect]. (Select the frame type ac-cording to the network environment.)NetWare Print Mode: Select [Pserver].Print Server Name: Specify the print server name created in step 4.Print Server Password: Specify only when setting from the NetWareserver. (Displayed by “----”.)Polling Interval: Specify “1”. (Change as necessary.)Bindery/NDS Setting: Select [NDS/Bindery Setting].File Server Name: Specify the name of the file server that connects tothe Pserver.7 Restart this machine (turn the main power off, then on again).– When turning the power off, then on again, be sure to turn the sub-power switch off first, then the main power switch. In addition, waitat least 10 seconds before turning the power on again; otherwise,this machine may not function properly.8 Use the NetWare server console to load MONITOR.NLM.9 Select the connection information and, in the active connection col-umn, check that the created Pserver is connected.For NetWare 4.x Remote Printer Mode (NDS)1 Log on to NetWare as an administrator from a client computer.2 Start up NWadmin.3 Select either the organization or organizational unit container that of-fers the print service, and then click [Print Services Quick Setup] on the[Tools] menu.4 Enter the appropriate names in the “Printer Server Name”, “PrinterName”, “Print Queue Name”, and “Print Queue Volume” fields, select“Other/Unknown” from the “Printer type” field, and then save the spec-ified settings.– For queue user privileges, printer notification option, assignment ofmultiple queues, and passwords, refer to the NetWare documenta-tion, and specify settings as necessary.
