Setting Up the PCL Driver 575/60BW-1 5-15StaplingMultiple-page documents can be stapled.The staple function is available only when the optional finisher (exceptingShift Tray) is installed.1 Click the Setup tab.2 Select the [Staple] check box.3 From the drop-down list, specify the number of staples and the sta-pling position.2 NoteDepending on the selected Binding Position setting, different stapling po-sitions are available.Number of sheets which can be stapled is 100 of Staple Finisher (100sheets) and 50 of Staple Finisher (50 sheets)/Folding Finisher on A4 orsmaller plain paper.Hole PunchingHoles can be punched into the printed document.The hole punch function is available only when optional finisher (exceptingShift Tray) is installed. In addition, the Punch kit or Punch Z-Fold Unit shouldhave been installed.1 Click the Setup tab.2 Select the [Hole-Punch] check box.3 From the drop-down list, specify the number of punched holes.
