Setting Up the PS Visual Driver (Windows) 675/60BW-1 6-39Bitmap CompressionSet whether or not to use the Bitmap compression. Using this function whenmuch image data should be printed, the printing speed may be improved.1 Click the PostScript tab.2 Select [RLE], [LZW] or [JPEG] from the [Compress Bitmap] pull downlist in the setting.– If you select [JPEG], then you can select the JPEG compressiontype from the [JPEG] pull down list.Using Tokenised PSSet whether or not to use Tokenised PS.1 Click the PostScript tab.2 If you use the Tokenised PS, select the [Tokenised PS] checkbox in thesetting.Setting the Output ProtocolSet the output protocol as follows.1 Click the PostScript tab.2 Select [Pure Binary] or [ASCII] from the [Output Protocol] pull down listin the setting.Setting the GammaSet the gamma correction value as follows.1 Click the PostScript tab.2 Set the gamma correction value from the [Gamma Level] pull down listin the setting.– Setting range is 0.000 - 2.000.
