Setting Up the PPD Driver (Mac OS X) 975/60BW-1 9-15SetupYou can specify the cover settings.1 From the [File] menu, select [Print].2 Select [Setup].3 Specify settings for the following:Paper Type Selects the paper type.Front Cover Page Attaches a front cover page.Paper Tray (Front Cover Page) Selects the input tray for the front cover.Back Cover Page Attaches a back cover page.Paper Tray (Back Cover Page) Selects the input tray for the back cover.PI Front Cover Set when the front cover is thick paper different fromother output paper.PI Back Cover Set when the back cover is thick paper different fromother output paper.Transparency Interleave Inserts interleaves between overhead projector trans-parencies.Paper Tray (Transparency Inter-leave)Selects the input tray for the transparency interleaves.
