Oki 182 Handbook

Also see for Microline 182: Maintenance manual

-----------CHAPTER 1 SETTING UPc. Close the paper release lever.d. Turn the platen knob away from you to pull the paperaround the platen and behind the column indicator bar.e. Move the column indicator bar back onto the platen so thatthe rollers rest on the paper you just inserted.- 10. Advance the paper, using the platen knob, until 1 inch of paperappears above the column indicator bar.11. Replace the access cover:a. Insert the three tabs in the edge of the access cover into theholes on the top front edge of the printer"b. Lower the access cover onto the printer.12. Grasp the paper and pull it through the opening in the accesscover. Use the platen knob if you need more paper.13. Insert the connector end of the power cord into the plug on theleft side of the printer back.14. Make absolutely certain that the ON/OFF power toggle switchon the side of the printer is OFF. (A sudden power surge candamage the printer.)15. Plug the power cord into a grounded (three-pronged) electricaloutlet.CAUTION: The printer must be grounded at all times. Do not avoid the grounding plug by using athree-to-two prong conversion plug.--9