Oki 182 Handbook

Also see for Microline 182: Maintenance manual

M~82/183 ________________________________ __-Skip Over Perforation: If you use fanfold paper with your printer,you may need to use this command to instruct the printer to automatically advancethe paper over the perforations.Character Pitch: You can change from 10 to 12 or 17.1characters per inch and you can also doublethe character width (10 characters per inchto 5 characters per inch, 12 characters perinch to 6 characters per inch and 17.1characters per inch to 8.5 characters perinch).Enhanced/Emphasized: Prints characters in a bolder type, commonly used for titles and subtitles.Underlining: Underlines a word or group of words.Character Sets: Choose from two different character sets;IBM character set either I or II is selectable(see page 56). There is also a switch selection which enables you to power up theprinter in either set and to establish thedefault character set.APA Graphics: Enables you to draw graphs, charts, andpictures.Cancel: Clears the data in the print buffer.What you do next depends on whether you have invested in a software package. If you have, skip to page 43 for advice on how toadd these features to your prepackaged software. If you do not havea software package, continue reading.The printer will not do certain things unless you specifically tell it to.You instruct the printer to change the way it prints by sendingspecial codes through your computer. When you write a program,you include the codes for printing features you want in your program. In BASIC, for example, include them in an LPRINT statement.-----38