Oki Data CONFIDENTIAL45487001TH Rev.1 4-30 /4. Maintenance menus4.3.2.6 Consumable counter displayThe consumable counter display is used for viewing the usage of consumables.1. Enter the self-diagnostic mode and, until CONSUMABLE STATUS appears,press the MENU or MENU button (the MENU button displays the next testoption and the MENU button displays the preceding test option). Then pressthe ENTER button.2. Pressing the MENU or MENU button displays the usage of each consumable(pressing the ONLINE or CANCEL button is disabled).3. Press the BACK button to end the option (the state in step 1 is restored).Upper Display Lower Display Format Unit DetailK-ID UNIT ******** IMAGES DEC Images Displays the number of turnsperformed by image drum unitfrom the first-time installation of ituntil present,*1K-ID USED ******** % DEC % Displays the usage of ID.FUSER UNIT ******** PRINTS DEC Prints Displays the number of printsmade from the first-timeinstallation of a fuser unit untilpresent *2K-TONER(FULL)******** % DEC % Displays the usage of toner.K-STC MODECNT******** *8192 DEC DOT Displays of the printing dot countnumbers of toner.K OVER RIDECNT******** TIMES DEC Times Displays the extension lifecounter value of a tonercartridge.*1 One third of the number of drum turns inA4 (A4 portrait) three-pages-per-job printing isregarded as one count.*2 Based on the paper length of Legal 13, if the sheet is the legal 13 length or less, it is regardedas one count, and if the sheet length exceeds the Legal 13 length, the number of countsis determined by how many times as large is the Legal 13 length as that of the sheet. (thedecimal is rounded out.)
