45487001TH Rev.1 2-29 /Oki D ata CONFIDENTIAL 2. I nstallation2.7 Connection methods connection>Note! Refer to the user’s manual for operating environment.1. Prepare a USB cable.Note! • No USB cable is supplied with this printer. Procure a USB cable with theUSB2.0 specifications separately.• To use Hi-Speed mode of USB2.0, a USB cable with the Hi-Speedspecifications is required.• A USB 2.0 cable to be used must be no more than five meters long. A USBcable of two meters or less is recommended.2. Turn off the printer and the computer.Memo Although a USB cable can be plugged in or unplugged with the computerand the printer switched on, for secure installation of the USB driver andthe printer driver to be performed subsequently, the printer should beturned off.3. Connect the USB cable.(1) Plug one end of the USB cable into the USB interface connection of the printer.(2) Plug the other end of the USB cable into the USB interface connection of thecomputer.Note! Be careful not to plug the USB cable into the network interface connection.It may cause a malfunction.Memo For the setup procedure of the printer driver, see the user’s manual.
