45487001TH Rev.1 2-35 /Oki D ata CONFIDENTIAL2. I nstallationConfiguring manually(1) Check and write down the SSID, encryption scheme, and cryptography key.You can check the SSID, encryption scheme, and cryptography key in theinstruction manual for the access point of the Wireless LAN.Note! • It is necessary to set the same SSID, encryption scheme, and cryptographykey for the access point of the Wireless LAN on the printer.• The SSID, encryption scheme, and cryptography key are essential for theWireless LAN connection. Be sure to check them.(2) Press the scroll button to select [Wireless Setting] and then press the button.(3) Enter the administrator password using the ten-key pad, then press the button.The factory default password is “aaaaaa”. Press the button wheneverinputting one character.(4) Press the scroll button to select [Manual Setup] and then press the button.(5) Press the scroll button to select [SSID] and then press the button.Memo When the button is pressed, the screen switches to the securitysettings screen in step 3 without switching to the screen in step 4. If the SSIDis not set, a warning screen is displayed.(6) Enter the SSID checked in step 1, using the ten-key pad.Memo Symbols such as “_ (underscore)” are entered using the * key.Note! Characters are case sensitive. Enter them correctly.(7) Once you have finished entering the characters, press the button.(8) Press the scroll button to select [Security] and then press the button.
