125 - C130n User’s GuideClearing Media MisfeedsTo avoid damage, always remove misfed media gently, without tearing it. Anypiece of media left in the printer, whether large or small, can obstruct themedia path and cause further misfeeds. Do not reload media that has misfed.Important!The image is not fixed on the media before the fusing process. Ifyou touch the printed surface, the toner may stick to your hands,so be careful not to touch the printed face when removing themisfed media. Make sure not to spill any toner inside the printer.CAUTIONUnfused toner can dirty your hands, clothes, or anything else itgets on.If you accidentally get toner on your clothes, lightly dust them offas best as you can. If some toner remains on your clothes, usecool, not hot water, to rinse the toner off. If toner gets on yourskin, wash it off with cool water and a mild soap.CAUTIONIf you get toner in your eyes, wash it out immediately with coolwater and consult a doctor.If, after clearing the media misfeed, the misfeed message in the control panelwindow persists, open and close the printer’s top cover. This should clear themisfeed message.Downloaded From ManualsPrinter.com Manuals
