48 - C130n User’s GuideEMULA-TIONSDEFAULT Settings AUTOMATIC, POSTSCRIPT, PCL5, PCL XL,HEX DUMPSpecify the printer control language.If AUTOMATIC is selected, the printer automaticallyselects the printer control language from the data stream.AUTODEFAULTSettings PCL5, POSTSCRIPTSelect the printer description language when it cannot beidentified from the data.POSTSCRIPTERRORPAGESettings ON, OFFSelect whether or not an error page is printedwhen a PostScript error occurs.PCL LINETERMINATIONSettings CR=CR LF=CRLF,CR=CR LF=LF,CR=CRLF LF=LF,CR=CRLF LF=CRLFSelect the definitions of the CR/LF codes inthe PCL language.FONT PITCHSIZESettings 44-1000-9999Specify the bitmap font size in thePCL language.FONTNUMBERSettings 0-32767Specify the font used with the PCLlanguage.The font numbers that appearcorrespond to the PCL font list.For details on printing the font list,refer to “PRINT MENU” onpage 32.POINTSIZESettings 400-1200-99975Specify the outline font size in thePCL language.SYMBOLSETSpecify the symbol set used withthe PCL language.The default setting is PC8.System Default MenuNote All factory default values are shown in bold.Downloaded From ManualsPrinter.com Manuals
