68 - C130n User’s GuideDuplexingSelect paper with high opacity for duplex (double sided) printing. Opacityrefers to how effectively paper blocks out what is written on the opposite sideof the page. If the paper has low opacity (high translucency), then the printeddata from one side of the page will show through to the other side. Checkyour application for margin information. For best results, print a small quantityto make sure the opacity is acceptable.Duplex (Double sided) printing can be done automatically with the duplexoption installed and selected.Important!Only Letter/A4 plain paper, 60–90 g/m2 (16–24 lb bond) can beautoduplexed. See “Print Media” on page 53.Duplexing labels, postcards, thick stock, or letterhead is notsupported.Duplex PrintingYou should verify that the duplex option is physically installed on the printer tosuccessfully duplex the job.Check your application to determine how to set your margins for duplexprinting.The following Binding Position settings are available.If “Short Edge” is selected, the pages will be laid out to flipat the top.If “Long Edge” is selected, the pages will be laid out to flipat the sides.131 2 11111 23Downloaded From ManualsPrinter.com Manuals
