55 - C130n User’s Guide" Dusty" Wet (or damp)Note Keep media between 15% and 85% relative humidity. Toner doesnot adhere well to moist or wet paper." Layered" Adhesive" Folded, creased, curled, embossed, warped, or wrinkled" Perforated, three-hole punched, or torn" Too slick, too coarse, or too textured" Different in texture (roughness) on the front and back" Too thin or too thick" Stuck together with static electricity" Composed of foil or gilt; too luminous" Heat sensitive or cannot withstand the fusing temperature (180°C[356°F])" Irregularly shaped (not rectangular or not cut at right angles)" Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons" Acidic" Any other media that is not approvedThick StockPaper thicker than 90 g/m2 (24 lb bond) is referred to as thick stock. Test allthick stock to ensure acceptable performance and to ensure that the imagedoes not shift.DO NOT use thick stock that is" Mixed with any other media in Tray 1 (as this will cause printermisfeeding)Capacity Tray 1 Up to 50 thick stock sheets, depending ontheir thicknessTray 2 Not supportedOrientation Face upDriverMedia TypeThick 1 (91 to163 g/m2)Thick 2 (164 to 209 g/m2)Weight 91 to 209 g/m² (25 to 55.9 lb)Duplexing Not supportedDownloaded From ManualsPrinter.com Manuals
