41 - C130n User’s GuideInterface MenuWith this menu, interface settings can be specified.The printer must be rebooted after any setting in the ETHERNET menu (forexample, the TCP/IP address) is changed.Therefore, the following message appears when the configuration menu isexited (the + key is repeatedly pressed) after a setting has been changed.Select YES, and then press the Enter key to reboot the printer.Otherwise, turn off the printer, and then turn the printer on again after a fewseconds.Interface Menu Tree" ETHERNET> TCP/IP- ENABLE- IPV4• DHCP/BOOTP• IPV4 ADDRESS• DEFAU7LT ROUTER• SUBNET MASK• ENABLE AUTO IP- PV6> IP SERVICES- ENABLE HTTP- DISABLE FILTERS- DISABLE IPSEC> IPX/SPX- FRAME TYPE> ETHERNET SPEED> DISABLE 802.1X> PS PROROCOL> USB- ENABLE- JOB TIMEOUTDownloaded From ManualsPrinter.com Manuals
