MAC OS X > 106CONFIGURING INSTALLED HARDWARE OPTIONSWhen you set up a printer using AppleTalk or USB, the printer’sinstalled hardware options are normally detected and automaticallyconfigured. However, if you are setting up a printer using TCP/IP, orhave added any additional hardware options since setting up theprinter, you need to manually configure installed hardware options.TO MANUALLY CONFIGURE INSTALLED HARDWAREOPTIONS:1. Launch the Print Center utility. This is located in theApplications/Utilities folder.2. Select the printer model in Print Center.3. From the Printers menu, select Show Info.NOTEThis information is for Mac OS X 10.2 or higher only. This feature is notavailable on Mac OS X 10.0 - 10.1.5.
