WINDOWS 9X DIFFERENCES > 37Proof and print featureThis feature allows you to send multiple copies of a document to printbut only print the first copy so that you can check the output qualitybefore printing the rest.SENDING THE DOCUMENT TO PRINTFrom your application’s Print dialogue, select the number of copiesyou need, and then click the Properties button.1. In the driver window, onthe Job Options tab, selectProof and Print (1).2. In the small pop-upwindow which appears,enter a name for this printjob (16 charactersmaximum) and a 4-digitPIN using any combinationof digits from 0 to 9, andclick OK.3. Click OK again to close thedriver window, and again to close your application’s Printdialogue.The document will be sent to the printer’s hard disk but only the firstcopy will print.See Chapter “Printer Settings in Windows” for information on printingthe remaining copies.NOTEWith both PS and PCL drivers, this feature requires the optional internalhard disk to be fitted and enabled in the Start/Settings/Printers/Properties/Device options dialogue.1
