Maintenance > 13611. Close the top cover and press down firmly at both sides sothat the cover latches closed.12. Gently lower the scanner.FUSER REPLACEMENTThe fuser is located inside the MFP just behind the four imagedrum units.Switch off the MFP and allow the fuser to cool for about10 minutes before opening the cover.WARNING!If the MFP has recently been powered on, some fusercomponents will be very hot. Handle the fuser withextreme care, holding it only by its handle, which willonly be mildly warm to the touch. A warning labelclearly indicates the area.
