Maintenance > 140CLEANING....THE ADFFrom time to time the pad assembly and feed rollers may becomecontaminated with ink, toner particles or paper dust. In this casethe scan module may not feed documents smoothly. If thisoccurs, follow the cleaning procedure below.1. Moisten a cotton swab with isopropyl alcohol (95%).2. Carefully pull open the ADF front cover.3. Wipe the feed roller (1) by moving the swab from side toside.4. Rotate the roller forward with your finger and repeat step3 until the roller is clean. Be careful not to snag ordamage the springs near the pad (2).5. Wipe the pad (2) from top to bottom, being careful not tohook the springs.6. Close the ADF front cover.12