- 41 -Connecting to a Computer1 1. Setup Using Bonjour(For Mac OS X 10.5 to 10.7)When connecting to the network with Bonjour,it is necessary to disable the sleep mode in theprinter. After doing that, install the driver onthe computer and set the printer as a networkprinter. First, disable the sleep mode on theprinter.1 Press the <ENTER> button on theoperator panel.2 Press the scroll button several timesto select [Admin Setup], and press the<ENTER> button.䎩䏘䏑䏆䏗䏌䏒䏑䏖䎃䎃䎃䎃䎃䎃䎕䎒䎕䫹 䎦䏄䏏䏌䏅䏕䏄䏗䏌䏒䏑䎤䏇䏐䏌䏑䎃䎶䏈䏗䏘䏓3 Enter the administrator password, usingthe numeric (0-9) keys.The factory default password is “aaaaaa”. Press<ENTER> button after each character you input.䎨䏑䏗䏈䏕䎃䎳䏄䏖䏖䏚䏒䏕䏇䯴䎙䎐䎔䎕䏇䏌䏊䏌䏗䏖䎌4 Press the <ENTER> button.5 Press the scroll button several timesto select [Power Setup], and press the<ENTER> button.䎤䏇䏐䏌䏑䎃䎶䏈䏗䏘䏓䎃䎃 䎃䎃䎃 䎖䎒䎗䎶䏜䏖䏗䏈䏐䎃䎶䏈䏗䏘䏓䎥䏘䏝䏝䏈䏕䎃䎶䏈䏗䏘䏓䎳䏒䏚䏈䏕䎃䎶䏈䏗䏘䏓䎰䏈䏐䏒䏕䏜䎃䎶䏈䏗䏘䏓6 Press the scroll button to select[Sleep], and press the <ENTER>button.䎳䏒䏚䏈䏕䎃䎶䏈䏗䏘䏓䎃䎃䎃䎔䎒䎔䎶䏏䏈䏈䏓䎤䏘䏗䏒䎃䎳䏒䏚䏈䏕䎃䎲䏉䏉䎳䏒䏚䏈䏕䎃䎶䏄䏙䏈7 Press the scroll button to select[Disable], and press the <ENTER>button.䎶䏏䏈䏈䏓䎃䎃䎃䎃䎃䎃䎃䎃䎃䎔䎒䎔䎨䏑䏄䏅䏏䏈䎍䎃䎃䎧䏌䏖䏄䏅䏏䏈8 Press the <ON LINE> button to exit themenu mode. Then, install the driver on the computer.1 Ensure that your printer and thecomputer are turned on and connected.Reference● “Connecting an Ethernet Cable” P.312 Insert “Software DVD-ROM” into thecomputer.
