- 76 -Setting the Buzzer2 2. Printing Basic Operation●● Setting the BuzzerYou can specify whether to sound a buzzer when an invalid operation is performed on the operationpanel or when an error occurs.1 Press the <ENTER> button on theoperator panel.2 Press the scroll button several timesto select [Admin Setup], and press the<ENTER> button.䎩䏘䏑䏆䏗䏌䏒䏑䏖䎃䎃䎃䎃䎃䎃䎕䎒䎕䫹 䎦䏄䏏䏌䏅䏕䏄䏗䏌䏒䏑䎤䏇䏐䏌䏑䎃䎶䏈䏗䏘䏓3 Enter the administrator password, usingthe numeric (0-9) keys.The factory default password is “aaaaaa”. Pressthe <ENTER> button whenever inputting onecharacter.䎨䏑䏗䏈䏕䎃䎳䏄䏖䏖䏚䏒䏕䏇䯴䎙䎐䎔䎕䏇䏌䏊䏌䏗䏖䎌4 Press the <ENTER> button.5 Press the scroll button several timesto select [Buzzer Setup], and press the<ENTER> button.䎤䏇䏐䏌䏑䎃䎶䏈䏗䏘䏓䎃䎃 䎃䎃䎃 䎖䎒䎗䎶䏜䏖䏗䏈䏐䎃䎶䏈䏗䏘䏓䎥䏘䏝䏝䏈䏕䎃䎶䏈䏗䏘䏓䎳䏒䏚䏈䏕䎃䎶䏈䏗䏘䏓䎰䏈䏐䏒䏕䏜䎃䎶䏈䏗䏘䏓6 Press the scroll button several timesto select [Invalid Operation Volume]or [Error Volume], and press the<ENTER> button.䎥䏘䏝䏝䏈䏕䎃䎶䏈䏗䏘䏓䎃䎃䎃䎃䎔䎒䎔䎨䏕䏕䏒䏕䎃䎹䏒䏏䏘䏐䏈䎬䏑䏙䏄䏏䏌䏇䎃䎲䏕䏈䏕䏄䏗䏌䏒䏑䎃䎹䏒䏏䏘7 Press the scroll button several timesto select a volume level, and press the<ENTER> button.䎬䏑䏙䏄䏏䏌䏇䎃䎲䏓䏈䏕䏄䏗䏌䏒䏑䎃䎹䎑䎑䎑䎔䎒䎔䎲䏉䏉䎍䎃䎯䏒䏚䎫䏌䏊䏋8 Press the <ON LINE> button to exit themenu mode.
