- 71 -Setting the Time that Elapses Before Entering the Sleep Mode2 2. Printing Basic Operation●● Setting the Time that Elapses Before Entering theSleep ModeNote● When a printer is in the power saving mode, press the <POWER SAVE> button to restore from the mode.● Check if the message “Ready To Print” appears. If the message is not displayed, press the <ON LINE> button.1 Press the <Fn> key on the operatorpanel.2 Enter “201” using the ten-key pad andthen press the <ENTER> button.䎩䏘䏑䏆䏗䏌䏒䏑䎃䎱䏘䏐䏅䏈䏕䎕䎓䎔䎨䏑䏗䏈䏕䎃䎔䎐䎖䏇䏌䏊䏌䏗䎃 䎱䏘䏐䏅䏈䏕3 Press the or to specify the time andthen press the <ENTER> button.䎶䏏䏈䏈䏓䎃䎷䏌䏐䏈䎃䎃䎃䎃䎕䎒䎖䎍 䎃䎖䎓䎃䏐䏌䏑䏘䏗䏈䏖䎙䎓䎃䏐䏌䏑䏘䏗䏈䏖䎔䎕䎓䎃䏐䏌䏑䏘䏗䏈䏖4 Press the <ON LINE> button.Memo● The sleep time can be selected from the followings:- [1 minute]- [2 minutes]- [3 minutes]- [4 minutes]- [5 minutes]- [10 minutes]- [15 minutes]- [30 minutes]- [60 minutes]- [120 minutes]
