Oki C822n User Manual

Also see for C822dn: User manual

Contents

Oki C822n User Manual Manual pdf 54 page image

- 54 -Supported Paper2 2. Printing Basic OperationPaper Type Paper Size mm (inch) Paper WeightEnvelope Com-10 104.8 x 241.3(4.125 x 9.5) Envelopes should be 85 g/m2 paper, andflap parts of envelopes should be foldedDL 110 x 220(4.33 x 8.66)C5 162 x 229(6.4 x 9)C4 229 x 324(9 x 12.76)Index card Index card 76.2 x 127(3 x 5)Label A4 210 x 297 0.1 - 0.2 mmLetter 215.9 x 279.4(8.5 x 11)Partly-printing paper Subject to the plain paper*1 64 to 256 g/m2Color paper Subject to the plain paper*2 64 to 256 g/m2Use paper that meets the following conditions*1:● Paper that meets the conditions for plain paper.● An ink used for a part printing is heat resistant (230°C).Note● When specifying a printing area, please take into account the differences of printing position as followings:Print start position: ±2 mm, Paper skew: ±1 mm/100 mm, Image stretch: ±1 mm/100 mm(when paper ream weight is 80 g/m2)● This printer cannot print on an ink.Use paper that meets the following conditions*2:● A pigment or an ink used to color paper is heat resistant (230°C).● Paper that has same characteristics with light paper and used for an electronic photo printer.Paper RecommendationsYour printer will handle a variety of print media,including a range of paper weights and sizes.This section provides general advice on choice ofmedia, and explains how to use each type.The best performance will be obtained whenusing standard 75 - 90 g/m2 paper designed foruse in copiers and laser printers.Use of heavily embossed or very rough texturedpaper is not recommended.Pre-printed stationery can be used, but the inkmust not offset when exposed to the high fusertemperatures used in the printing process.CAUTION● Envelopes should be free from twist, curl orother deformations. They should also be of therectangular flap type, with glue that remainsintact when subjected to hot roll pressure fusingused in this type of printer. Window envelopes arenot suitable.● Labels should also be of the type recommendedfor use in copiers and laser printers, in which thebase carrier page is entirely covered by labels.Other types of label stock may damage the printerdue to the labels peeling off during the printingprocess.