- 74 -Settings for Turning Power Off Automatically (Auto Power Off)2 2. Printing Basic Operation●● Settings for Turning Power Off Automatically(Auto Power Off)Note● In the factory default, a printer does not enter the auto power off mode while connecting to the network.Setting the Auto Power OffTimeTo enable the auto power off mode whileconnecting to the network perform the followingprocedure.1 Press the <ENTER> button on theoperator panel.2 Press the scroll button several timesto select [Admin Setup], and press the<ENTER> button.䎩䏘䏑䏆䏗䏌䏒䏑䏖䎃䎃䎃䎃䎃䎃䎕䎒䎕䫹 䎦䏄䏏䏌䏅䏕䏄䏗䏌䏒䏑䎤䏇䏐䏌䏑䎃䎶䏈䏗䏘䏓3 Enter the administrator password, usingthe numeric (0-9) keys.The factory default password is “aaaaaa”. Pressthe <ENTER> button whenever inputting onecharacter.䎨䏑䏗䏈䏕䎃䎳䏄䏖䏖䏚䏒䏕䏇䯴䎙䎐䎔䎕䏇䏌䏊䏌䏗䏖䎌4 Press the <ENTER> button.5 Press the scroll button several timesto select [Power Setup], and press the<ENTER> button.䎤䏇䏐䏌䏑䎃䎶䏈䏗䏘䏓䎃䎃 䎃䎃䎃 䎖䎒䎗䎶䏜䏖䏗䏈䏐䎃䎶䏈䏗䏘䏓䎥䏘䏝䏝䏈䏕䎃䎶䏈䏗䏘䏓䎳䏒䏚䏈䏕䎃䎶䏈䏗䏘䏓䎰䏈䏐䏒䏕䏜䎃䎶䏈䏗䏘䏓6 Press the scroll button several timesto select [Auto Power Off], and pressthe <ENTER> button.䎳䏒䏚䏈䏕䎃䎶䏈䏗䏘䏓䎃䎃䎃䎔䎒䎔䎶䏏䏈䏈䏓䎤䏘䏗䏒䎃䎳䏒䏚䏈䏕䎃䎲䏉䏉䎳䏒䏚䏈䏕䎃䎶䏄䏙䏈7 Press the scroll button or to select[Enable], and press the <ENTER>button.䎤䏘䏗䏒䎃䎳䏒䏚䏈䏕䎃䎲䏉䏉䎃䎃䎃䎔䎒䎔䎤䏘䏗䏒䎃䎦䏒䏑䏉䏌䏊䎧䏌䏖䏄䏅䏏䏈䎍䎃䎃䎨䏑䏄䏅䏏䏈8 Press the <ON LINE> button to exit themenu mode.
