Oki C9300 User Manual
Also see for C9300 Series: User manualSoftware installation guideInstallation instructionsSpecification sheetUser manual
                                                   | |
Contents
| 
Installing the Finisher1. Ensure that the printer is switched OFF (0).Note: In the following sections, printer paper trays arenumbered from the top down. Thus Tray 1 is the originaltray, Tray 2 is an additional tray and Trays 3 through 5comprise the HCF unit. For simplicity, the HCF is notshown. Also, the supplied Blanking plate is not necessaryfor the C9300/C9500 printers.2. Pull down the printer Face Up Stacker (1) in the three stagesshown (2) and peel off the seal (3) to expose the connector (4).3. Fit the Bridging Assembly to the printer using the four screws,with the longer screws in the lower positions.4. At the opposite end of the printer, open the printer cover andTray 2 cover that give access for paper jam removal. Removethe printer cover retaining screw from position (1), and pull13421 |
Related manuals for Oki C9300 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine