Oki C9300 User Manual
Also see for C9300 Series: User manualSoftware installation guideInstallation instructionsSpecification sheetUser manual
                                                   | |
Contents
| 
EnvelopeCannot be used in the Finisher.Label StationeryCannot be duplexed. Use from MP tray only.OHP SheetCannot be duplexed. Use from Tray 1 and MP tray only.Notes:1. Trays (5 in total) are numbered from the top down.2. When feeding the Finisher, printer Custom dimensions are:width 3.94" to 11.69" (100 to 297mm) and length is 5.83" to35.43" (148 to 900mm).3. When feeding the Finisher, Tabloid extra, A3 outsize, and A3wide (SRA3) of weight 46 to 52 lb. US Bond (176 to 198g/m²)cannot be used.4. When feeding the Finisher, Envelope 1(portrait No 3),Envelope 2 (portrait No 4), Envelope 3 (landscape No 4),Com-9, Com-10, DL, C4 and Monarch cannot be used.Paper ejection detailsFinisher Face Up stacker• No stapling is possible when using the Face Up Stacker.• Duplexing is only available for normal sized paper, A3 — A5,Letter — Tabloid. A maximum of 27 lb. US Bond (105g/m2)paper can be used for double-sided printing.• Long-side punching only is available.• Envelopes cannot be used.Finisher Face Down stackerThe only possible paper usage is as follows:EO: ejection onlyPL: punched for long-side bindingPS: punched for short-side bindingST: staplings: used for single-sided printing onlyd: used for both single-sided and double-sided printingx: cannot be usedSize and Weight EO PL PS STNormal paper, 17 to 21 lb. US Bond (64 to 80g/m2 )Letter (landscape), A4 (landscape) s s x s |
Related manuals for Oki C9300 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine