4.PRINTING FROM UNIX/LinuxPrinting From Application 1714 PRINTING FROM UNIX/Linux Output BinThe output bin can be specified using the following options.If the Finisher (optional) is not installed on the equipment, the default output tray will be used (inner). If the Finisher(optional) is installed on the equipment, the default output tray will be used (bin2).Example: The command to specify output bin 1 is “lp -o bin1 ”. Hole PunchingThis sets whether a print job is printed with hole punches. When the hole punch option is installed it can be activated usingthe following option.If this option is not specified, the default value of “nopunch” will be used.This function is not available for all paper sizes and the users should refer to the Copying Guide for a list of compatiblepaper sizes. In particular, A5, A6 and statement paper sizes will not work with this function.Example: The command to hole punch the long edge feed portrait page is “lp -o punch=1 ”. Media TypeThe paper source can also be selected using the media type using the following option.In PostScript Deferred Media Selection is always turned on so the paper size has priority over the media type and thepaper source.In PCL5e the paper size always has priority over the media type and the paper source.If this option is not specified, the default value will be used.Example: The command to specify Thick1 media type is “lp -o mtype=Thick1 ”.Option Value Alternate Value Descriptioninner Select the inner tray.bin1 Select the upper output tray of the Finisher (optional).bin2 Select the lower output tray of the Finisher (optional).Option Value Alternate Value Descriptionpunch=0 nopunch Hole punching is turned off.punch=1 Hole punch on long edge without rotation.punch=2 Hole punch on short edge without rotation.punch=3 Hole punch on long edge with 180 degree rotation.punch=4 Hole punch on short edge with 180 degree rotation.Option Value Alternate Value Descriptionmtype=Plain A paper source that contains Plain paper is requested.mtype=TransparencyA paper source that contains transparency slides isrequested.mtype=Thick1 A paper source that contains Thick1 paper isrequested.mtype=Thick2 A paper source that contains Thick2 paper isrequested.mtype=Thick3 A paper source that contains Thick3 paper isrequested.
