4 PRINTING FROM UNIX/Linux174 Printing From Application Department CodeThe department code can be set using the following option.A department code is specified within 63 characters.If the entered department code is longer than 63 characters, it is clipped to 63 characters when a job is sent.The following characters are invalid for department codes:" & ' ( ) ; < > ^ ` | ~ @ # % * !Enther the department code in a 5-digit number. How the equipment performs printing for an invalid department code print job, for which an invalid department codeis specified, varies depending on the Invalid Department Code Print Job setting that can be set in the TopAccessAdministrator mode and whether SNMP communication is enabled or not.- When SNMP communication is enabled and Invalid Department Code Print Job is set to [Store to invalid joblist], an error message will be displayed when an invalid department code is entered.- When SNMP communication is disabled and Invalid Department Code Print Job is set to [Store to invalid joblist], the invalid department code print job will be stored in the invalid department code print job list withoutprinting.- When the Invalid Department Code Print Job is set to [Print], the invalid department code print job will beprinted.- When the Invalid Department Code Print Job is set to [Delete], the invalid department code print job will bedeleted. For the appropriate department code, ask your system administrator. SmoothingThis sets whether to print text and graphics smoothly. This mode can be set using the following option.Example: The command to set the smoothing mode is “lp -o smoothing=on ”.This option is available only when you have either the ES9160 MFP/ES9170 MFP.Option Value Alternate Value Descriptiondept=code Set the department code. A department code within 63characters comes in [code].Option Value Alternate Value Descriptionsmoothing=on ON Set the smoothing mode.smoothing=off OFF Cancel the smoothing mode.
