5 MANAGING PRINT JOBS FROM THE CONTROL PANEL214 Checking SuppliesChecking Supplies Viewing the drawer statusWhen the equipment is idle, pressing [JOB STATUS] > [SUPPLY] displays the [SUPPLY] tab. From this tab, you can viewthe paper size setting selected for each drawer. If you press [SUPPLY] when printing is in progress, the drawer from whichpaper is being fed is highlighted.If you try to print a document from a client computer and specify a paper size while none of the drawers or bypass tray onthe equipment has the specified size of paper, a printing error occurs, and [JOB STATUS] blinks. In this case, pressing[JOB STATUS] displays the [SUPPLY] tab, from which you can learn which drawer needs additional sheets of paper. Forfurther instructions on how to clear a printing error, refer to the Troubleshooting Guide. Checking remaining toner levelsPressing [JOB STATUS] > [TONER] displays the [TONER] tab from which you can check the approximate amount of tonerremaining in the toner cartridges.If any of the toner cartridges is running out, be sure to get a new cartridge ready. For more information about replacingtoner cartridges, refer to the Quick Start Guide or the Troubleshooting Guide.
