2.PRINTING FROM WINDOWSSetting Up Print Options 712 PRINTING FROM WINDOWSIf the connection to the equipment has not been configured correctly, the message “The address of your printercould not be located. Would you like to find it?” will be displayed when you click [Update Now]. If it is displayed,click [Yes] and search for the equipment using the [Local Discovery] dialog box. After searching for the equipment,SNMP communication will be enabled. For the instructions on how to search for the equipment, refer to theinstructions of Local Discovery.If you disable SNMP Communication, Local Discovery notification also will be disabled.12) [Restore Defaults]Click this to restore the configuration of this equipment displayed in the [Device Settings] tab menu to the originalfactory defaults.Drawer Settings1) Paper SizeSelect the paper size set in each drawer.2) Paper TypeSelect the paper type set in each drawer.3) AttributeSelect the attribute of the paper. When you set the attribute, the drawer will be selected preferentially according to theprint settings.4) Override Application Paper Source SettingsSelect this check box to use the paper source setting in the printer driver rather than the application setting.5) [Restore Defaults]Click this to restore the settings displayed in the [Drawer Settings] dialog box to the original factory defaults.Drawers selectable differ depending on the model and the option configuration.1 2345
