45584901TH Rev.1 5-28 /Oki Data CONFIDENTIAL5.3.2 Paper jam in finisher section[ea10] Paper not detectedClassification Error contentPaper jam in finisher section Paper was not detected at the finisher within the set period after thepaper was fed by the main unit.Check item MeasuresEntrance transport sensor • Sensor check (S1)• Connector check (P7-2)• Harness checkFinisher control PC board • Board check• Connector check (J7)• Harness checkParts to be replaced RemarkEntrance transport sensorFinisher control PC board[ea20] early arrival jamClassification Error contentPaper jam in finisher section A sheet of paper is fed and then the next sheet of paper is fed at aninterval shorter than the specified time.Check item MeasuresTransport path If there is paper in the paper transport path, remove the paper.Entrance transport sensor • Sensor check (S1)• Connector check (P7-2)• Harness checkExit transport sensor • Sensor check (S2)• Connector check (P8-1)• Harness checkFinisher control PC board • Board check• Connector check (J7, J8) J7: input, J8: output• Harness checkParts to be replaced RemarkEntrance transport sensorExit transport sensorFinisher control PC board
