|
45584901TH Rev.1 4-28 /Oki Data CONFIDENTIAL4.4.10 Background offsetting adjustment for RADF (common for copy, scan and fax)The background level for scanning originals with the RADF is adjusted when the backgroundfogging at the scanning of a manually-set original and an original used with the RADF isdifferent. This is to adjust the level of the background image removed when the scanning of theoriginals with the RADF is performed.Color mode Code RemarksColor 7026 The larger the value is, the darker the background density becomes.Acceptable values: 0 to 255(Default: 128)Black 7025The procedure is the same as that of P. 4-23 “4.4.2 Density adjustment”.4.4.11 Adjustment of the capacity and image quality of SlimPDFThe compression quality or the resolution is adjusted to reduce the file capacity of a SlimPDF orimprove its quality.Code Item to be adjusted Remarks9104 Compression quality ofSlimPDF backgroundprocessingThe smaller the value, the less the file capacity and thelower the image quality becomes. The larger the value,the greater the file capacity and the higher the imagequality becomes.Acceptable values: 0 to 10 (Default: 5)9107 Resolution of SlimPDFbackground processingThe smaller the value, the less the file capacity and thelower the image quality becomes. The larger the value,the greater the file capacity and the higher the imagequality becomes.0: 75dpi1: 100dpi2: 150dpi3: 200dpiAcceptable values: 0 to 3 (Default: 1)(1) While pressing [0] and [5] simultaneously, turn the power ON.(2) Key in the codes to be adjusted and press the [START] button.(3) Key in the adjustment value. (To correct a value once keyed in, press the [CLEAR] button.)(4) Press the [OK] or [INTERRUPT] button to store the value in memory. → The equipmentgoes back to the ready state.(5) Let the equipment restart. Acquire the SlimPDF file and check it.(6) If the desired image quality has not been attained, repeat step (1) to (5).
|
