Oki MICROLINE ML380 Maintenance Manual

Also see for ML380: User guide Handbook Parts Breakdown

40959201TX Rev.1 63 /(e) Additional details:• The contents of the buffer will be printed without a CR. (Carriage does not moveto the home position.)• No line feed occurs when n = 0.• Top of form will not be set.(f) Related functions:• Double width set by SO (or ESC SO in Epson mode) will not be reset.13) Fine line feed (n/360 inch)(a) Code: ESC % 4 n(b) Compatibility: IBM(c) Function:A n/360" immediate line feed is executed without changing the current line spacing.(d) Range:• Range n = 0—255 Number of 1/360" increments.(e) Additional details:• The contents of the buffer will be printed without a CR. (Carriage does not moveto the home position.)• No line feed occurs when n = 0.• Top of form will not be set.(f) Related functions:• Double width set by SO will not be reset.14) Reverse line feed(a) Code: ESC j n(b) Compatibility: EPSON LQ(c) Function:Once this command is received the printer will execute an immediate reverse linefeeds, which will be executed only once for each time this command is sent.(d) Range:• Range n = 0—255(e) Additional details:• The printer will perform an n/180" reverse line feed each time this command issent.• The current line spacing will not be changed.• It must not exceed TOF irrespective of whether or not there is perforation skip.Note: It is not recommended to use the pull tractor option feed unit when reverse line feedsare required.