Oki MICROLINE ML380 Maintenance Manual

Also see for ML380: User guide Handbook Parts Breakdown

40959201TX Rev.1 111 /12) Select emulation(a) Code: ESC { n(b) Compatibility: EPSON LQ/IBM(c) Function:This command allows the software developer to change the printer emulation toaccess the features that match this requirements.(d) Additional details:• This command is not documented for public use.• This command duplicates the MENU selection.• When emulation is changed DLL will be cleared.13) Printer initialization(a) Code: ESC } NUL(b) Compatibility: EPSON LQ/IBM(c) Function:• Upon receipt of this code the printer will be initialized to all its menu defaultsettings. This command is always active regardless of the menu “Reset Inhibit”.(d) Additional details:• All data in the buffer will be cleared and the current printhead position becomestop of page.• DLL data will be deleted (EPSON).14) Set initial condition(a) Code: ESC [ K Ln Hn Init Id Parm1 Parm2(b) Compatibility: IBM(c) Function:Sets initial conditions of printer(d) Range:• Ln, Hn … Sets subsequent parameter bytes.00H ≤ Ln ≤ FFH00H ≤ Hn ≤ FFHThe subsequent parameter bytes is Ln + (Hn ¥ 256) bytes.If Ln = Hn = 00H, data up to ESC [ K Ln Hn is dumped and this command modeis canceled.Normally, use Hn = 00H and also Ln = 01H – 04H.• Init … Sets initial conditions of printer.Init = 00HSettings of menu item A are retained.Parm1 and Parm2 settings are set for each mode.Init = 01HSettings of menu item A are retained.Parm1 and Parm2 settings are set for each mode.