Oki MICROLINE ML380 Maintenance Manual

Also see for ML380: User guide Handbook Parts Breakdown

40959201TX Rev.1 113 /(e) Additional details:• This command is active when menu item “Reset Inhibit” is set to “No” If “Yes”, thiscommand is ignored.• If there is data that is not printed yet when this command is received, it is printed.In such a case, CR is executed but LF is not.• The following shows relationship between menu items and parameters.Menu item A detailNo. Items ML380/381 Turbo1 Emphasized Print None (always OFF)2 Double-High Print As per menu item Size setting. Normal3 Double-Wide Print As per menu item Size setting. Normal4 Pitch As per menu item Pitch setting. 10CPI5 LQ As per menu item Print Mode setting. UtilityNote: The underlined setting shows default setting (when mode is cleared).Menu item B detailNo. Items ML380/381 Turbo1 Paper end alarm None (always OFF)buzzer2 Auto CR mode As per menu item Auto CR setting.3 Auto LF mode As per menu item Auto LF setting.4 Page length As per menu item Page Length setting.5 Zero character As per menu item Zero Character setting.6 Character set As per menu item Character Set setting.Menu item C detailNo. Items ML380/381 Turbo1 CPI mode upon As per menu item SI Select (12CPI) setting.receipts of 12CPI+ condensed2 FF code operation None (FF is always executed).at TOF position3 Page print width As per menu item Page Width.4 ON/OFF of CSF None (current printer mode is retained).mode