English30 Dial DIrectoriesTo Do This UseEnter two letters using Press the No © key to move to the nextthe same key. character.Move the cursor to Yes ß and No © keysmake corrections.8 Press the Start key.The display will show NO=.9 Enter the alternate fax number. Refer to the instruc-tions following Step 5.10 Press the Start key to finish programming theOne Touch key. The display will show LOCATIONPROGRAMMING.11 To continue programming One Touch keys, goback to Step 3. If you are finished programming,press the Select Function key.12 Lift off the plastic cover above the One Touch label.Using a pencil, write in the name for your newly-programmed One Touch key. Then replace the cover.One Touch ParametersIf you are experiencing problems communicating witha remote location in a very noisy telephone area, setup a One Touch key for that location and try turningEcho Protection on for that One Touch key.1 Press the Select Function key.2 Press the 9/User Program One Touch key.The display will show 1:FUNC. PROGRAMMING.3 Press the Yes ß key.The display will show FUNCTION NO. [ ].4 Using the numeric keypad, enter 23.The display will show 23:ONE TOUCH PARAM.5 Press the One Touch key for the location whosesettings you want to change. The display willshow ECHO PROTECTION, [OFF].6 Press the No © key to switch Echo Protection on.7 Press the Yes ß key to confirm your selection.The display will show 23:ONE TOUCH PARAM. [ ].8 Press the Select Function key to finish.Tip: Switch Echo Protection back off if you laterchange the location the One Touch key is used for.Chain DiallingEach fax number that you enter or program intoyour fax machine can be up to 32 digits long. Inthe case that you need to dial a number which islonger than 32 digits, use the chain dial feature.To create a chain dial number, program the first 31digits of the number into a One Touch key or AutoDial number. Then press the 8/+ One Touch key tomake this a chain dial number. Next, program therest of the number into another One Touch key orAuto Dial number (or, you can leave the second part4100 Fax ENGLISH 15/1/97 9:37 am Page 30
