EnglishChapter 4 - Basic Operations 39RediallingIf the line is busy or if there is no answer, your fax machine waits and thenautomatically redials the number. Also, if your fax machine istransmitting from memory and a communication error occurs, itautomatically redials the number and tries to send the fax again. You canredial a number manually at any time by pressing the Redial key.Confirming resultsAfter transmission, press the Copy key once (with no documents loaded)to see a report confirming your transmission on your fax machine’sdisplay. To print the report, press the Copy key a second time. See Reportsfor more information.Stopping a transmissionTo stop a transmission while it is in progress, follow the instructionsbelow.1. Press the Stop key twice. The display will show STOPPED.2. If documents are stuck part way through the document feeder, youmay see the following message on the display RELOADDOCUMENT. Press the Stop key again. Your fax machine feeds thedocument the rest of the way through the document feeder.Note: If your fax machine cannot feed your document through thedocument feeder, refer to Problem Solving.Receiving faxes manuallyNote: Receiving faxes manually is not possible when the ISDN optionis fitted.Your fax machine receives faxes automatically unless the fax machine hasbeen set to the manual receive [TEL] mode. If your fax machine is set tothe manual receive [TEL] mode, follow the instructions below.1. When your telephone or fax machine rings, pick up the telephonehandset. If the call is a voice call, start speaking to the caller.2. If the call is a fax call, or if a person wishes to fax you a documentafter having a conversation, press the Start key.GB4550.book Page 39 Wednesday, June 14, 2000 9:21 PM
