EnglishChapter 5 - Advanced Operations 617. Press the Start key and the display changes to SELECTLOCATION.8. Select the location of the relay key station as follows:9. Press the Start key. Your fax machine will begin sending the fax.PollingWhen you normally send faxes, you load your document into your faxmachine, select a location and, if required, press the Start key to beginsending the document. However, sometimes it is more useful to be able tosimply load your document into your fax machine and set it to wait for theanother fax machine to call and collect the document. This is called settingyour fax machine to be polled, or polling transmission. Calling anotherfax machine to receive documents someone else has loaded into their faxmachine is called polling reception.There are two standards for polling. Standard polling is to an old standardthat is used by many, but not all manufacturers and ITU selective polling,which is the latest standard. Your fax machine supports both standards.ITU selective polling allows you to retrieve documents from individualmailboxes or ITU sub-addresses from a fax machine that meets thestandard for ITU selective polling.Polling transmission1. Load your document.2. Press the Select Function key.3. Press the 5/Polling One Touch Key. The display shows BULLETINPOLL.4. For standard one-time polling, press the NO " key. If user function17:MEM./FEEDER SW. has been set to FEED (see Programming),your document remains on the document feeder and waits for it toSelect location using Do thisA One Touch key Press the One Touch key.Auto Dial number Press Auto Dial key, then enter two digit Auto Dial code number onthe numeric keypad.A number dialled on thenumeric keypad Dial as you would on a normal telephone.GB4550.book Page 61 Wednesday, June 14, 2000 9:21 PM
