EnglishChapter 4 - Basic Operations 41automatically prints out any messages received in memory when the paperis replaced and the Stop key is pressed.No toner receptionWhen your fax machine is running low on toner, it displays a TONERLOW, REPLACE TONER CART. message. Rather than risk printing anunreadable message, your fax machine automatically receives faxes intomemory if user setting 22:NO TONER MEM. RX has been set to on.If your fax machine has received a message in memory because toner islow, MSG. IN MEMORY appears on the display. To print out a messagestored in memory when toner is low, follow the instructions below.1. Press the Select Function key.2. Press the 2/Print Operation One Touch key. The display will showPRINT MEMORY MSG?3. Press the ! YES key and stored messages will begin printing.Note 1: If a memory reception password has been set, you will have toenter this password to print any messages stored in memory.Note 2: Even if you see a TONER LOW message on your fax machine,you may be able to use the 2/Print Operation One Touch key tocontinue printing faxes, but the print quality cannot beguaranteed. Replace your toner cartridge as soon as possible.Cancelling messages stored in memoryIt is also possible to erase messages received in memory without printingthem.1. After you have followed the instructions to print out messagesstored in memory, the display shows MSG. IN MEMORY,PRINTING.2. To erase the message instead of printing it, press the Stop key. Thedisplay shows CANCEL?3. Press the ! YES key to erase the message from the memory of yourfax machine.GB4550.book Page 41 Wednesday, June 14, 2000 9:21 PM
