Oki OKIFAX 4550 User Manual

Contents

Oki OKIFAX 4550 User Manual Manual pdf 63 page image

EnglishChapter 5 - Advanced Operations 518. Press the ! YES key. The display shows SELECT LOCATION(S).9. Select your location as follows.Note 1: If user function 17:MEM./FEEDER SW. has been set to FEEDand you are sending a delayed fax to a single location, yourdocument remains on the document feeder until yourprogrammed date and time. This prevents you from sendingfurther faxes until your delayed fax has been sent.Note 2: If user function 17:MEM./FEEDER SW. has been set to MEMand you are sending a delayed fax to a single location, yourdocument is scanned into memory. When the programmed dateand time is reached, your document is sent.10. Repeat the above procedure if you want to send another delayedfax. Please note that you can only program a maximum of fivedelayed transmissions into the memory of your fax machine.Sending delayed faxes to groups and/or multipleindividual locations1. Load your document.2. Press the Select Function key.3. Press the 1/Delayed TX One Touch key. The display showsDELAYED TX DATE and today’s date.4. Press the ! YES key and go to Step 7 if transmission is to occurlater today. If the transmission is to occur up to three days later,press the NO " key. The display shows DELAYED TX DATE [ / ]PRG. DATE 0-9.Select location using Do thisA One Touch key Press the One Touch key. If display asks for confirmation of yourselection, press the Start key.Auto Dial numberPress Auto Dial key, then enter two digit Auto Dial code number onthe numeric keypad. If display asks for confirmation of yourselection, press the Start key.A number dialled on thenumeric keypadDial as you would on a normal telephone and press the Start key. Ifthe ISDN G4 option is fitted, the fax machine shows the currenttransmission mode G3 or G4. To select the current setting, press the! YES key. To change the current setting, press the NO " key firstand confirm this new setting with the ! YES key.GB4550.book Page 51 Wednesday, June 14, 2000 9:21 PM