128SettingsThe specific use of the alternative line can be set (TX/RX/ALL). Speedaccess 32.1. When TX is set, it can only be used for outgoing calls.2. When RX is set, it can only be used for incoming calls.3. When ALL is set, it can be used for both.Notes: Both lines must be connected to the same type of line (PSTN orPBX).This setting must be TX or ALL for use with the Delayed Trans-mission (Memory) function.To set the alternative line use:1. Press MENU/EXIT to enter the menu.2. Input speed access no. 32 (Option Line Type).3. Press S or T to select the desired mode, press ENTER.4. Press MENU/EXIT to return to standby mode.Displays and reportsThe display ordinarily shows the status of the main line; however, thealternative line can be shown by pressing the HELP key. Also, when twolines are in use, a buzzer indicating the end of the communication soundsfor the displayed line. No sound is emitted when use of the line that is notshown ends.Protocol dump and transmission result reports are generated for bothlines. Use of the alternative line is indicated by a “#” mark.
