Chapter 5 - Advanced Operations73Caution:Be sure to keep a note of your password in a safe and secure place in case youforget it.6. Press T to set BACKUP FILE TX to ON, press ENTER.7. Follow the instructions in Chapter 4 to program the remote faxnumber or email address into Speed Dial location 040. You will beprompted for your password after selecting Speed Dial number 40.Note: If you already have a remote location programmed into SpeedDial 040, this location will be used for backup file transmission.If this is not the location you want for this feature you shouldchange it now.The machine will now automatically copy all outgoing faxes to the loca-tion programmed into Speed Dial 040. If you wish to also forwardincoming faxes to location 040, set the receive mode to FWD (see "CallForwarding" in this chapter). You will be prompted to enter your pass-word again when changing receive mode.To set BACKUP FILE TX to OFF1. Press MENU/EXIT to enter the menu.2. Press T to select SETUP, press ENTER or X.3. Press T to select MACHINE SETTINGS, press ENTER or X.4. Press T to select BACKUP FILE TX, press ENTER or X.5. Enter your password, then press ENTER.6. Press T to set BACKUP FILE TX to OFF, press ENTER.When BACKUP FILE TX is OFF, Speed Dial 040 works like anyother Speed Dial location.
