Chapter 5 - Advanced Operations597. Repeat the above steps to prepare multiple sessions.Note 1: Only locations programmed into Speed Dial numbers 31-40 areapplicable.Note 2: Time must be entered using the format 0000-2359 (24-hourclock).Note 3: There is no limit to the number of batch transmission sessions toset using Speed Dial numbers (31-40), however, no moresessions will be accepted once memory is filled.Cancelling delayed transmissionsFollow the instructions provided below to cancel a delayed transmissionbefore it has been sent.1. Press STOP.2. The display will show that the communication has been cancelled.3. The display shows Location ID or Tel. No. of delayed transmissionscurrently programmed in the machine.4. Use S or T keys to select transmission to cancel and then pressENTER.5. The Location ID and Tel. No. of the selected transmission will bedisplayed. After confirmation, press the CLEAR key.6. Selected transmission will be cancelled.7. For a delayed transmission from the document tray, press STOPagain to remove the document.8. Press MENU/EXIT to return to standby mode.Priority transmissionWhen there is a need to ensure that a document is transmitted immedi-ately, the document(s) loaded and scanned under this feature hold priorityover previously scanned documents or the processing of messagesreceived in dual access or standby modes.Sending priority transmissions is as follows:1. Load the document(s).2. Press MENU/EXIT to enter the menu.
