Chapter 6 - Customising83TSI printWith this setting in the ON state, the telephone number of the remotemachine is printed at the top of each page of the fax received.OptionsMulti function peripheral (MFP) PC interface kitThe MFP PC Interface Kit is basically a software package that allows yourmachine to interface with a computer connected via a parallel data cable.Once the optional MFP software is installed in the computer and a paralleldata cable attached to connect the two devices, the fax machine canprovide PC Fax, Printer and Scanner operations. For further details, pleasesee Appendix B.Internet fax and network printer/scannerThe internet fax and network printer/scanner option allows the faxmachine to operate as a network printer with a variety of LAN systemsand protocols including Novell and Microsoft. Installation of the networkinterface card (NIC) enables the option of utilising Network Print Service:10-page per minute, 600dpi printing with Hiper-W print emulation. It alsobecomes possible to receive fax images as e-mails and to transmit faximages as e-mails. For further details, please refer to Appendix C.ISDN G4 boardThe ISDN G4 Board raises the machine operability to ITU-T G4 classifi-cation with digital communications at 64Kbit/s. Although PSTN (publicswitched telephone network) settings are deactivated when installed, thesystem is equipped with a setting to activate an automatic fallback func-tion that enables communications in either G3 or G4 mode, depending onthe classification of the remote machine. This option is dealer installed.For further details, please see Appendix D.This board also supports dual mode communication, which means thattwo G4 communications can be received or transmitted simultaneously.
