7-2 C OPYINGBefore copyingDocument and paper handlingBefore you begin making copies, please read the information mentioned on pages 2-10 to2-16.Changing your machine to the Copy modePress the <COPYFAXSCAN> key until the “COPY” light glows.Display in the copy standby modePress <COPYFAXSCAN> to change the machine to the copy mode.When the machine is in the copy mode, the machine shows:Copy Ready 01Auto A4 100% To change the settings, refer to “Basic copy settings” on page 7-4.Memory overflow messageIf you have stored too much information in your machine’s memory, a “Memory Over-flow” message will appear on the LCD:0HPRU\2YHUÀRZStart Or CancelThis appears because (1) too many pages have been stored in the memory, or (2) thestored pages have too much information for your machine to remember.If this message appears, press to tell your machine to copy as many pages intomemory, or press to delete the current job from memory (but not previousoperations).NOTEIf the machine is idle for 3 minutes it will automatically print the document stored inthe memory during the current operation.
